YUBAO大型伺服橫行式機械手臂T系列；主要應用在400-4000ton的各型臥式成型機。各軸驅動使用高性能的AC伺服馬達驅動，，具備超高速的取出時間1.5秒、全循環時間在12秒以內，高定位精度重現性達∮0.15mm，程序具有可教導性，可依據動作需求彈性的設定動作，具備高性能的取出特性。應用在成型周期短的各項產品取出應用，或是應用在較復雜的自動化場合。

有 YBT800~YBT3000機型，手臂型式有：單/雙節型，并可以增加副臂用于三板模的應用，上下行程在800~3000mm。超快速的取出大幅提高生產效率。

Yu leopard type intelligent servo horizontal large mechanical arm T series is mainly used in the 400-4000 ton of each model horizontal molding machine. Each shaft driven using a high performance AC servo motor drive, with ultra-high speed of take out time of 1.5 seconds, the whole cycle time within 12 seconds, high positioning accuracy repeatability of 30 mm, 0.15 program is to teach, it can be set according to the action of the elasticity of demａnd action, have to take out the characteristics of high performance. Application in various products molding cycle is short of, or used in more complex automation.

Have YBT800~YBT3000 models, for double cross arm type and can increase pair of arm used in three board application, up and down stroke in 1300 ~ 3000 mm. Super fast take out greatly increased production efficiency.

采用高性能AC伺服馬達驅動，可取出成品深度大之產品，取出產品多樣化；超高速的取出時間大幅提升生產的效率。

高剛性3D結構設計，結構穩定震動小耐久壽命長。

使用高精度高速專用的直線滑軌，耐磨損、耐熱、壽命長不變形。

手臂結構采用高剛性鋁擠型梁，質量輕、高剛性，配合皮帶倍速機構保證取出時間。

T型齒型鋼絲PU皮帶傳動，穩定性佳，定位精確重現性達∮0.15mm。

T2000型以上為重荷重型設計，可荷重50Kg以上，T3000型更可以荷重120Kg，用于超大型產品的取出。

diversification; Super fast take out time to boost the efficiency of production.

High rigid 3 d structure design, stable structure vibration endurance life long.

Dedicated linear slide rail with high precision high speed and wear resistance, heat resistance, long service life without deformation.

Use high rigid extruded aluminum beam arm structure, light weight, high rigidity, cooperate to belt out times speed institutions guarantee time.

T type tooth type wire PU belt transmission, stability, high precision positioning repeatability of 30 0.15 mm.

Over T2000 type designs for the burden of heavy, can load more than 50 kg, type T3000 can load 120 kg more, take out for very large products.