Flange shaft
Bearing Design
Pretensioned angular contact bearings at the output in an O-arrangement, ideally suited for helical geared rack and pinion drive.
Mounting Positions
- Any mounting position.
Lubricants and Maintenance
- Synthetic lubricant CLP HC ISO VG 150
- Lubricated for life
- Maintenance-free
Paint Finish
- Housing and connector black RAL 9005
- Motor cover b-side magenta RAL 4010
Synchronous Servo Motor EZ
- Extremely compact.
- Highest power per unit volume.
- Large torque.
- High dynamic.
Synchronous Servo Motor EZ
External Fan
- According to DIN EN 60034-6, IC416
- To increase torque and continuous performance.
- In case of higher surrounding temperatures.
- Also available as a retrofit kit.
External Fan
Motor Brake
Optionally the motor b-side can be equipped with a permanent magnet holding brake.
EZ Brake
Encoder
Absolute value encoder EnDat® 2.1 or EnDat® 2.2
- Optical or inductive measuring principle
- High system accuracy with up to 23 bits resolution
- Up to 4096 recordable resolutions in multiturn version
- Electronic nameplate ensures fast and easy commissioning
- Additional information transferred with the position value (EnDat® 2.2)
- Compatible with STOBER drive controllers and drive controllers of many third-party manufacturers
Resolver
- High temperature resistance
- High vibration strength and shock resistance
Power and Encoder Interface
- Rotating plug connectors with quick lock.
- Option: Supplied with mating connectors.
EZ Connection Method
Encoder One Cable Solution (OCS)
HIPERFACE DSL One Cable Solution (OCS)
- Significantly reduced wiring effort by eliminating the encoder cable
- Significantly reduced space requirements by eliminating the encoder plug connector
- High system accuracy with up to 20 bits resolution
- Up to 4096 recordable resolutions in multiturn version
- Electronic nameplate ensures fast and easy commissioning
- Additional information transferred with the position value
Power and Encoder Interface One Cable Solution (OCS)
- Rotating plug connector with quick lock (connection lines between the encoder and drive controller are routed along in the motor's power cable).
- Option: Supplied with mating connector.
EZ Connection Method (OCS)
Winding Protection
PTC thermistors are installed in STOBER synchronous servo motors as a configuration feature to implement thermal winding protection. This makes it possible for the motor to exceed the maximum permitted winding temperature with the appropriate devices turned off.
Drive Controller Recommendation
- POSIDRIVE MDS 5000 with power range 0.75 to 45 kW
- POSIDYN SDS 5000 with power range 0.75 to 45 kW
- SD6 with power range 0.75 kW to 45 kW
- SI6 with power range 0.75 kW to 25.9 kW
For further information see Drive Controllers
| Type | Ratio | Max. perm. acceleration torque [Nm] | Stall torque on the gear unit output [Nm] | Max. perm. input speed in cyclic operation [1/min] | Backlash [arcmin] | Torsional stiffness [Nm/arcmin] |
| PH321 | 5 – 10 | 24 – 65 | 8.1 – 41 | 6000 | 4 | 11 – 16 |
| PH322 | 20 – 50 | 52 – 65 | 18 – 44 | 8000 | 4 | 14 – 15 |
| PH421 | 4 – 10 | 41 – 130 | 17 – 84 | 5000 – 6000 | 3 | 21 – 39 |
| PH422 | 16 – 70 | 65 – 130 | 22 – 97 | 6500 – 8000 | 3 | 24 – 29 |
| PH521 | 4 – 10 | 77 – 320 | 38 – 201 | 5000 – 6000 | 3 | 55 – 98 |
| PH522 | 16 – 70 | 126 – 320 | 52 – 246 | 6000 – 7000 | 3 | 58 – 71 |
| PH721 | 4 – 10 | 192 – 700 | 80 – 451 | 4000 – 5000 | 3 | 117 – 185 |
| PH722 | 16 – 70 | 298 – 700 | 108 – 532 | 5000 – 6500 | 3 | 126 – 150 |
| PH821 | 4 – 10 | 557 – 1378 | 254 – 902 | 3500 – 4000 | 3 | 317 – 634 |
| PH822 | 16 – 100 | 521 – 2000 | 273 – 1543 | 4500 – 6000 | 3 | 305 – 484 |
| PH932 | 12 – 60 | 1618 – 5000 | 744 – 2977 | 3000 – 4500 | 3 | 1057 – 1240 |
| PH1032 | 18 – 60 | 2427 – 7500 | 1117 – 4196 | 3000 – 4500 | 3 | 1602 – 1778 |
