SSM-500 LBS 稱重傳感器        SSM-500 LBS 稱重傳感器            

SSM SERIES CAPACITY RANGES: 50, 100, 200, 500, 1,000, 2,000, 2,500, 5,000, 8,000, 10,000 LBS.

The SSM Series Surface Stud Mount load cells were designed to be surface mounted with the load applied through the mounting stud for tension or compression applications. The matching surface must be flat and at least 2 inches in diameter. Eight threaded mounting holes are provided on the bottom surface for fastening down from beneath. These sensors are manufactured from heat treated 17-4ph stainless steel, and the sensing element incorporates bonded foil strain gages of the highest quality. They are sealed for protection against most industrial environments.

參數

Rated Output (R.O.): 2 mV/V nominal

Nonlinearity: 0.15% of R.O.

Hysteresis: 0.15% of R.O.

Nonrepeatability: 0.05% of R.O.

Zero Balance: 1.0% of R.O.

Compensated Temp. Range: 60° to 160°F

Safe Temp. Range: -65° to 200°F

Temp. Effect on Output: 0.005% of Load/°F

Temp. Effect on Zero: 0.005% of R.O./°F

Terminal Resistance: 350 ohms nominal

Excitation Voltage: 10 VDC

Safe Overload: 150% of R.O.

Deflection Inches: 0.002 @ R.O.

訂貨型號

Order Code Model Capacity Range Calibration Description

SSM-50 50 lb Compression Included, Tension Optional

SSM-100 100 lb Compression Included, Tension Optional

SSM-200 200 lb Compression Included, Tension Optional

SSM-500 500 lb Compression Included, Tension Optional

SSM-1K 1,000 lb Compression Included, Tension Optional

SSM-2K 2,000 lb Compression Included, Tension Optional

SSM-2.5K 2,500 lb Compression Included, Tension Optional

SSM-5K 5,000 lb Compression Included, Tension Optional

SSM-8K 8,000 lb Compression Included, Tension Optional

SSM-10K 10,000 lb Compression Included, Tension Optional

配件

CAL-TEDS N/A Plug & Play Option with Connector

TC-CAL N/A Tension Calibration Option