熱塑性聚酯彈性體TPEE-25D技術說明
Technical description of thermoplastic polyester elastomer TPEE-25D
TPEE-25D是一款邵氏硬度25D，顏色穩定的TPEE熱塑性聚酯彈性體。它具有良好的低溫耐沖擊性，且在*高使用溫度110℃下仍保持良好的機械性能。可滿足食品接觸FDA認證級別。可用傳統的熱塑性模制技術注塑成型或擠出成型。廣泛應用于軟管和管件，電線電纜，薄膜片材，輸送帶，塑料橡膠改性等產品。
TPEE-25D is a stable color TPEE thermoplastic polyester elastomer with shore hardness of 25D. It has good low-temperature impact resistance, and still maintains good mechanical properties at the maximum service temperature of 110℃. It can meet the FDA certification level of food contact. Traditional thermoplastic molding technology can be used for injection molding or extrusion molding. It is widely used in hoses and pipe fittings, wires and cables, film sheets, conveyor belts, plastic rubber modification and other products.
測試項目 | 單位 | 測試方法 | 典型值 |
拉伸強度/Tensile Strength,25℃ | MPa | GB/T 528 | 9 |
斷裂伸長率/Elongation at Break,25℃ | % | GB/T 528 | 835 |
邵氏硬度/Shore Hardness,25℃,3s | HD | GB/T 2411 | 25 |
懸臂梁沖擊強度/Izod notched impact strength,25℃ | KJ/m2 | GB/T 1843 | NB |
熔體流動速率/Melt flow rate,（220℃,2.16kg） | g/10min | GB/T 3682 | 10.8 |
密度/Density | g/cm3 | GB/T 1033 | 1.12 |
烘料干燥溫度/Drying Temperature | ℃ | - | 90-100 |
干燥時間/Drying Time | hr | - | 2-3 |
建議加工溫度/Recommended Processing Temperature | ℃ | - | 210-225 |
模具溫度/Mold Temperature | ℃ | - | 45-55 |
