技術參數表
| 規格表Specification | ||||
| 型號Model | Units | TYU-2100S | ||
| 統 系 出 射 | 螺桿直徑Screw Diameter | mm | φ50 | |
| 射出壓力Injection Pressure | Kg/cm2 | 2630 | ||
| 理論射出容Theoretical Shot volume | cm3 | 471 | ||
| 射出量（P.S)Max. Shot Weight | g/Oz | 420/14.8 | ||
| 射出率Injection Rate | cm3/sec | 370 | ||
| 溫控區Temperature Control | ZONE | 5 | ||
| 料斗容量Material Hoppper Capacity | L | 60 | ||
| 統 系 模 鎖 | 合模力Clamping Force | T | 210 | |
| 開模力Opening Force | T | 20 | ||
| 模柱間距Distance Between Tie Bare | mm | 800x800 | ||
| 最小模厚Min Mold Height | mm | 350 | ||
| 開模行程Opening Stroke | mm | 650 | ||
| 開模距Max. Open Daylight | mm | 1000 | ||
| 射嘴中心Nozzle Center Height | mm | / | ||
| 射嘴中心距Nozzle Center Distance | mm | / | ||
| 頂出力量Ejector Force | T | 6.5 | ||
| 頂出高度Ejector stoke | mm | 150 | ||
| 液 統 系 力 電 | 液壓Max. Hydaulic Pressure | Kg/cm2 | 140 | |
| 作動油量Pump Output | L | 800 | ||
| 油泵電機Pump Motor Power | Kw | 55 | ||
| 電熱容量Barrel Heating Power | Kw | 8 | ||
| 總用電量Total Wattage | Kw | 63 | ||
| 其 它 | 機器重量Machine Weight | T | 12.6 | |
| 機器外形尺寸Machine Dimensions(LxWxH) | m | 3.0x1.9x4.6 | ||
