產品介紹
◆ Product Introduction
XGJ型電纜吸干機是根據國外樣機設計制造而成,廣泛應用于電線、電纜行業，特別適用于小線徑、高線速度。它利用旋渦泵產生的高負壓，將線纜表面的水分吸干，可提高線纜表面質量，使線纜表面計米印字更加清晰、牢固。吸入的水分通過氣水分離器分離，不影響環境。
XGJ type cable absorption drier is designed and made based on foreign model machine, widely used in wire and cable industries, especially applicable for small wire diameter and high line speed. It makes use of high negative pressure produced by vortex pump to absorb the mositure on cable surface, which can improve cable surface quality to make the meter printing on cable surface clearer and firmer. The absorbed mositure is separated through gas-water separator without affecting environment.
◆特點
◆ Characteristics
◆ 設備結構簡單，體積小，外觀美觀，操作方便；
◆ Simple equipment structuer, small volume, beautiful apperance and easy operation;
◆ 噪聲低，負壓大；
◆ Low noise and large negative pressure;
◆ 對于小線徑、高線速度的吸干效果優于普通吹干機。
◆ The abosorption effect of small wire diameter and high line speed is superior to the common blow-drying machine.
◆主要技術參數
◆ Main Technical Parameters
◆ 適用線徑； Φ1mm---Φ12mm；
◆ Applicable Wire Diameter:
◆ 旋渦泵功率: 2.2 kW；
◆ Vortex Pump Power: 2.2 kW
◆ 流量: 160 m3/h；
◆ Maximum Flow: 160 m3/h
◆ 負壓: 16.5 kPa。
◆ Maximum Negative Pressure: 16.5 kPa
