目錄:廣東樂善智能裝備股份有限公司>>吹瓶機U型機系列>> SCJ-90-75U2X1.20F廣東20L吹瓶機 PE雙螺桿擠出機 高速全自動吹瓶機U型機系列(直線導軌）
| 類別Category | 直線導軌U系列 Linear guide rail U series | ||||
| 機型 Model | SCJ-90-75U2X1.20F | ||||
| 項目 | Items | 單位Unit | 參數 | ||
| 基本參數 Specification | 類別 | Category | / | 雙層 2 layers | |
| 制品大容積 | Max. Blow Volume | （L） | 20 | ||
| 適用原料 | Material | / | PE\PP | ||
| 模頭坯料數量 | No.Of Die Head | / | 1 | ||
| 常用模頭中心距 | Die Head distance (cee to cee) | （mm） | / | ||
| 機器凈重約 | Net Weight | （kg) | 17500 | ||
| 機器外形尺寸 | Machine Dimension | （m，L×H×W） | 5×4×3.5 | ||
| 模頭 Die Head | 模頭加熱段數 | Die Head Heating Zone | / | 5 | |
| 模頭加熱功率 | Die Head Heating Power | (kW) | 16 | ||
| 鎖模架系統 Carriage system | 模架數量 | No.Of Station | / | 2 | |
| 小合模距 | Min Mold Closing Distance | (mm) | 380 | ||
| 大開模距 | Max Mold Openning Distance | (mm) | 880 | ||
| 模板尺寸 | Effective Dimension Of Mold Plate | (mm,W×H) | 480x600 | ||
| 擺架行程 | Carriage Stroke | (mm) | 700 | ||
| 鎖模力 | Clamping Force | （kN) | 196 | ||
| 擠出系統 Extruder Unit | 螺桿直徑 | Extruder Diametre | (mm) | 90 | 75 |
| 螺桿長徑比 | Extruder Length/Diametre Ratio | / | 24 | 24 | |
| 螺桿轉速 | Extruder Rotating Speed | (rpm) | 66 | 10~68 | |
| 大塑化能力 | Max Extrusion Capacity | (kg/h) | 160 | 90 | |
| 擠出電機額定功率 | Extruder Motor Rated Power | (kW) | 37 | 22 | |
| 機筒加熱段數 | Barrel Heating Zone | / | 4 | 5 | |
| 機筒加熱功率 | Barrel Heating Power | (kW) | 15.6 | 10 | |
| 冷卻風機功率 | Cooling Fan Power | kW | 0.72 | 0.3 | |
| 動力系統 Power Unit | 油泵電機額定功率 | Oil Pump Motor Rated Power | (kW) | 30 | |
| 液壓系統額定工作壓力 | Hydraulic System Rated Wong Pressure | Mpa | 16 | ||
| 氣動系統額定工作壓力 | Pneumatic System Rated Wong Pressure | Mpa | 0.8 | ||
| 水冷系統額定工作壓力 | Cooling System Rated Wong Pressure | Mpa | 0.4 | ||
| 通用制品耗氣量（壓縮后） | Universal product air consumption(compressed) | m3/hr | 19 | ||
| 熱切刀變壓器功率 | Hot Cutter Power | (kW) | 2 | ||
| 裝機總功率I | Total Installed Power I | (kW) | 133.62 | ||
| 備注 Remarks | 液壓油牌號/油箱容積 | Hydraulic oil NO. / tank volume | L | 46#/300 | |
| 冷水機選型（風冷/水冷） | Chiller recommend (air-cooled/water-cooled) | hp | 15/10 | ||
| 空壓機選型（加儲氣罐） | Air compressor recommend (Add gas storage tank) | hp | 10 | ||
| 備注/Remarks： | 以上機型均可疊加100點壁厚控制系統，疊加后改變的參數如下All the machines above can be optionally equipped with 100 points parison cool system,parameters would be changed as below: | ||||
| 疊加壁厚控制后 After with 100points parison cool | 機型 | Model | / | SCJ-90-75U+S2X1.20F | |
| 壁厚油泵電機額定功率 | Parison Servo Motor Rated Power | kW | 5.5 | ||
| 裝機總功率II | Total Installed Power II | kW | 139.12 | ||
| 鎖模板示意圖 Clamping plate |  | ||||
| 備注： 1、各機型加熱功率與模頭配置有關，因模頭配置不同，可能出現加熱功率稍有差異的情況 2、本參數表僅供參考，實際機型參數可能會有所調整 3、耗氣量為設備參考值，實際耗氣量會因設備功能不同存在差異； | |||||
| Note: 1. The heating power of each model is related to the configuration of the die head. Due to the different configuration of the die head, there may be a slight difference in heating power. 2. This parameter list is for reference only, and the actual model parameters may be adjusted. | |||||
3
塑料機械網