| 型號規格 Specifications | 單位 UNIT | CH180F |
| *號International size rating | 600 |
| 注射裝置 INJECTION UNIT | | A | B | C |
| 螺桿直徑 Screw diameter | mm | 40 | 45 | 50 |
| 螺桿長徑比Screw L/D ratio | L/D | 22.5 | 20 | 18 |
| 理論注射容Theoreticai shot volume | cm3 | 283 | 358 | 442 |
| 注射量 Shot weight(PS) | g | 257 | 326 | 402 |
| OZ | 9.1 | 11.5 | 14.2 |
| 注射壓力 Injection pressure | Bar | 2145 | 1695 | 1373 |
| 注射速率 Injection rate(PS) | g/s | 113 | 143 | 177 |
| 射膠行程 Injection stroke | mm | 225 |
| 螺桿轉速 Max.screw speed | rpm | 200 |
| 塑化能力 Plasticizing capacity(PS) | g/s | 17 | 22.6 | 28.4 |
| 射嘴接觸力Nozzle sealing force | KN | 53 |
| 鎖模裝置 CLAMPING UNIT | | |
| 鎖模力 Clamping force | KN | 1800 |
| 開模行程 Opening stroke | mm | 435 |
| 拉桿內間距Distance between tie-bars | mm | 530x470 |
| 小模具尺寸Min mould dimension | mm | 345x305 |
| 小模厚 Max.mold height | mm | 520 |
| 小模厚 Min.mold height | mm | 180 |
| 模板大開距MAX.Dalylight | mm | 955 |
| 頂出行程 Ejector stroke | mm | 135 |
| 頂出力 Ejector force | KN | 53 |
| 頂出數 No.of ejector pins | PCS | 4+1 |
| 其它 OTHERS | | |
| 系統壓力 System pressure | Mpa | 16 |
| 油泵排量 Hydraulic pump capacity | CC | 63 |
| 電馬達功率Drive mootor power | kw | 18.5 |
| 電熱功率Heator Power | kw | 9.9 |
| 加熱段數 No.of heater zones | pcs | 3+1 |
| 外形尺寸 Machine dimensions(LxH) | m | 4.93x1.48x1.98 |
| 理論機重Machine weight | Tom | 6.0 |
| 容積Oil tank capacity | L | 260 |
| 模板正面尺寸圖 Platen dimensions | |
| 模板側面尺寸圖 Mould space dimensions |
