熱釋電能量傳感器

以色列OPhir PE9電能量傳感器

	熱釋電激光能量傳感器 – 0.2μJ 到 10J Ophir熱釋電激光能量傳感器采用創新的技術，能在范圍廣泛的條件下得到精確和可重復的測量，包括到高達 5ms 的長脈沖和高達 25KHz 的重復頻率。 高能量熱釋電傳感器 – 50μJ 到 40J，孔徑zui大 95mm 與上面的熱釋電傳感器類似，但配備有散射片，因此能測量高能量和平均功率。

以色列OPhir PE9電能量傳感器

Model PE9-C PE9-ES-C

Use Very Sensitive Most Sensitive

Aperture mm φ8 φ8

Absorber Type metallic metallic

Spectral Range μm (a) 0.15 - 12 0.15 - 12

Surface Re?ectivity % approx. 50 50

Calibration Accuracy +/-% (a) 3 3

Max Pulse Width Setting (d) 1μs 2μs 20μs 1μs 2μs 20μs

Energy Scales 1mJ to 2μJ 1mJ to 2μJ 1mJ to 20μJ 200μJ to 200nJ 200μJ to 200nJ 200μJ to 2μJ

Lowest Measurable Energy μJ (b, c) 0.5 <0.2 0.5 0.1 <0.05 0.1

Max Pulse Width μs 1 2 20 1 2 20

Maximum Pulse Rate pps 25kHz 15kHz 10kHz 25kHz 15kHz 10kHz

Noise on Lowest Range μJ 0.04 0.05 0.1 0.01 0.01 0.02

Additional Error with Frequency % ±1% to 15kHz, 

±6% to 25kHz

±1% to 15kHz ±1% to 10kHz ±1.5% to 25kHz ±1.5% to 15kHz ±1.5% to 10kHz

Damage Threshold J/cm2

<100ns 0.1 0.1

1μs 0.2 0.2

300μs 3 3

Linearity with Energy (b) ±1% ±1.5%

Maximum Average Power W 2 2

Maximum Average Power Density W/cm2 30 30

Fiber Adapters Available (see page 78) ST, FC, SMA, SC ST, FC, SMA, SC

Weight kg 0.25 0.25

Version

Part Number 7Z02933 7Z02949

Note: (a) Calibrated curve is checked and adjusted at 

the following wavelengths (μm) 

For other wavelengths in the curve there is additional 

calibration error as stated.

0.193, 0.355, 1.064, 1.48-1.6 

240-800nm add ±4%, 2-3μm add ±8%, 10.6μm add ±15%.

0.355, 1.064, 1.48-1.6

240-800nm add ±4%, 2-3μm add ±8%, 10.6μm add ±15%.

<240nm not calibrated

Note: (b) For >7% (>10% for PE9-ES-C) of full scale, with the "user threshold" setting set to minimum. For other settings, the spec is for >7%/>10% of full scale or greater than twice the "user 

threshold", whichever is greater.

The user threshold is available with Nova II, Vega, StarLite or Juno. For other meters, the threshold is set to minimum and the linearity spec is >10% of full scale. The PE-C series will only operate 

with Nova or Orion meters with an additional adapter Ophir P/N 7Z08272 (see page 79). The adapter can introduce up to 1% additional measurement error.

 The user threshold feature allows adjustment of the internal threshold up to 25% of full scale if desired to avoid false triggering in noisy environments. The user threshold setting represents 

the approximate minimum energy for pulse widths below ~50% of the pulse width setting. For longer pulse widths, the actual minimum may be higher. For highest accuracy, it is 

recommended to zero the sensor against the meter the ?rst time it is used with a particular meter. For further information, see the FAQs on our Website.

Note: (c) A shock absorbing mounting post is available for situations in which sensor is mounted on a surface subject to shock or vibration. This can prevent false triggering and allow working 

at lower minimum energies (see accessory page 79 for mounting post).

Note: (d) With the Laserstar, Pulsar, USBI, Quasar and Nova/Orion with adapter, only 2 out of 3 pulse widths settings are available; the 1μs (displayed as “10μs”) and the 2μs (displayed as “20μs”).

 香港奧德賽創科技有限公司產品主要有安規檢測類產品、環境類試驗箱、*試驗機、疲勞試驗機、燃燒阻燃類試驗設備各類檢測儀器，并代理了美國ED&D、日本KYOKUTOU極東、日本極東、日本志賀、日本愛模、日本TEAC、日本LINIAX、日本日本NMB、日本NoiseKen、美國MONROE、美國ELECTRO-LITE、以色列ophir、德國WAZAU、德國PTL、德國PTI、OPHIR等檢測儀器。

深圳市奧德賽創精密儀器有限公司的誠信、實力和產品質量獲得業界的認可。
歡迎各界朋友蒞臨參觀、指導和業務洽談。請銷售總監：蘇曼 
： 
：  
:
:
web:  
地址：