產品名稱：特種料：PFA，法國蘇威， MFA XPH 5510_1N（ 產品說明） 所在地區：法國 產品報價：面議

恒隆塑膠原料有限公司位于東莞樟木頭鎮塑膠原料市場中心城C4棟58號,地理位置*,是專業生產、加工、銷售塑膠原料與改性工程塑料于一體的綜合性企業。經營產品有：POM塑膠原料,PET塑膠原料,PBT塑膠原料,PC+ABS塑膠原料……比如工程塑膠原料：POM、PBT、PET、PC/ABS、PA66、PC、PPO、PPE、PA6、PA46、PA9T、PA6T、PA12、PA11、ASA、AES、CA等。...
全氟烷氧基樹脂　　PFA樹脂相對來說是比較新的可熔融加工的氟塑料。 　　PFA的熔點大約為580F，密度為2.13— 2.16g/cc（克/立方厘米）。PFA與 PTFE和FEP相似，但在302T以上時，機械性能略優于FEP，且可在高達500F下的溫度下使用，它的耐化學品性與PTEF相當。PFA的產品形式有用于模塑和擠塑的粒狀產品，用于旋轉模塑和涂料的粉狀產品；其半成品有膜、板、棒和管材。美國市場經銷的PFA樹脂有DUPOut公司的Teflon牌、Daikin公司的Neoflon牌、Ansimont公司的Hthen牌、HOechst Celanese公司的 Hostafl牌。PFA的用途與FEP類似。PFA（可溶性聚四氟乙烯〕耐熱、耐寒、化學穩定性、機械性、絕緣性、自潤滑性、耐折性、耐開裂性優異。公司開發有注塑、擠出，模壓料。2. 適用范圍:目前國內主要用于防腐防酸堿注塑件、高溫電線電纜、防酸堿內襯件，吹塑制品等。技術參數：比重（g/CM3）2.12-2.17

 本公司 可以免費提供各種材料物性及各種材質認證 如：SGS UL   MSDS  ROHS  MDS 等證明  ：    通過這些鏈接您能夠訪問供應商資料。我們盡量保證 準確數據資料； UL 黃卡含有 UL 驗證的易燃性和電氣特性物性說明

	Hyflon® AD 40H	Solvay Specialty Polymers	Perfluoropolymer
	Hyflon® AD 40L	Solvay Specialty Polymers	Perfluoropolymer
	Hyflon® AD 60	Solvay Specialty Polymers	Perfluoropolymer
	Hyflon® MFA 1041	Solvay Specialty Polymers	Perfluoropolymer
	Hyflon® MFA D5220X	Solvay Specialty Polymers	Perfluoropolymer
	Hyflon® MFA F1520	Solvay Specialty Polymers	Perfluoropolymer
	Hyflon® MFA F1530	Solvay Specialty Polymers	Perfluoropolymer
	Hyflon® MFA F1540	Solvay Specialty Polymers	Perfluoropolymer
	Hyflon® MFA P6010	Solvay Specialty Polymers	Perfluoropolymer
	Hyflon® MFA XPH 5510_1N	Solvay Specialty Polymers	Perfluoropolymer

物性說明

產品說明
Hyflon® XPH 5510_1N is a white aqueous MFA dispersion. Hyflon® XPH 5510_1N exhibits excellent wetting properties and high shear stability. Hyflon® XPH 5510_1N has very good film forming behavior and is especially suited for top-coat passes to produce final items with superior gloss. Due to its features, XPH 5510_1N can of course also find use in formulations for coating applications. Main features of Hyflon® XPH 5510_1N MFA® dispersion are: NO polyethoxylated alkylphenols Excellent wetting properties Superior gloss of final items
總體
材料狀態	已商用：當前有效
資料 1	Technical Datasheet
搜索 UL 黃卡	Solvay Specialty Polymers Hyflon® MFA
供貨地區	北美洲 非洲和中東 南美洲 歐洲 亞太地區
性能特點	光澤，高 快速潤濕
用途	Impregnation Applications 涂敷應用
外觀	白色
形式	液體

物理性能	額定值	單位制	測試方法
密度	1.41	g/cm3	ASTM D4441
pH值	> 9.00		ASTM D4441
平均顆粒尺寸	7.1E-6	in	Internal Method

熱性能	額定值	單位制	測試方法
熔融溫度	590	°F	ASTM D4591

充模分析	額定值	單位制	測試方法
布絡克菲爾德粘度 （68°F）	20	mPa·s	ASTM D2196
補充信息	額定值	單位制	測試方法
MFA Content 2	55.0	wt%	ASTM D4441
Non Ionic Surfactant 2	3.5	wt%	ASTM D4441
Processing Hyflon® XPH 5510_1N is processed according to methods generally used for conventional impregnation technology. Generally the procedure involves dip-coating and then heating to remove water and surfactant from the impregnated item. Depending on the application, sintering above the melting point of the coated resin may be carried out to obtain the finished coated articles. Hyflon® XPH 5510_1N can be processed neat or appropriay formulated. Also, it can be used diluted using distilled or deionized water. Formulation, line speed and oven temperature must all be well controlled for optimized features of the coated substrates. Storage and Handling Hyflon® MFA® dispersions must be stored under suitable temperature conditions to ensure prolonged stability. Temperatures lower than 5°C must be avoided to prevent irreversible settling. Also, some settling may occur on prolonged standing and/or heat exposure. It is therefore strongly recommended that the product is always kept at temperatures below 35°C. The optimum storage temperature range is 10 - 25°C. It is also advisable that the product is homogenized by gentle rolling or stirring once per month and prior to use. Prolonged exposure of the liquid to air could lead to some coagulation at the surface due to water evaporation. For this reason and also to avoid contamination, it is recommended to keep the containers closed when not in use. Safety and Toxicology Before using Hyflon® MFA® dispersions consult the product Material Safety Data Sheet and follow all label directions and handling precautions. As with all PTFE materials, handling and processing should only be carried out in well ventilated areas. Venting units should be installed above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact wash with soap and water. In case of eye contact flush with water immediay and seek medical help. Do not smoke in areas contaminated with powder, vapour or fumes. See Material Safety Data Sheet for detailed advice on waste disposal methods. Packaging Hyflon® XPH 5510_1N is packaged in either 25 kg drums or 1500 kg IBC's.

:何生 　
:86-　
傳真號碼:86-
地址:廣東 東莞市

特種料：PFA，法國蘇威， MFA XPH 5510_1N（ 產品說明）其它產品

特種料：PFA，法國蘇威， MFA XPH 5510_1N（ 產品說明）
特種料：PFA，法國蘇威，MFA P6010（ 產品說明）
特種料：PFA，法國蘇威，MFA F1540（ 產品說明）
特種料：PFA，法國蘇威，MFA F1530（ 產品說明）
特種料：PFA，法國蘇威，MFA F1520（ 產品說明）
特種料：PFA，法國蘇威，MFA D5220X（ 產品說明）
特種料：PFA，法國蘇威，AD 60（ 產品說明）
特種料：PFA，法國蘇威，MFA 1041（ 產品說明）
特種料：PFA，法國蘇威，AD 40H（ 產品說明）
特種料：PFA，法國蘇威，MFA F1930X（ 產品說明）