產品名稱：EVOH，日本可樂麗，GF-30 所在地區：日本 產品報價：面議

恒隆塑膠原料有限公司位于東莞樟木頭鎮塑膠原料市場中心城C4棟58號,地理位置*,是專業生產、加工、銷售塑膠原料與改性工程塑料于一體的綜合性企業。經營產品有：POM塑膠原料,PET塑膠原料,PBT塑膠原料,PC+ABS塑膠原料……比如工程塑膠原料：POM、PBT、PET、PC/ABS、PA66、PC、PPO、PPE、PA6、PA46、PA9T、PA6T、PA12、PA11、ASA、AES、CA等。...
 本公司 可以免費提供各種材料物性及各種材質認證 如：SGS  UL   MSDS  ROHS  MDS 等證明  ：     通過這些鏈接您能夠訪問供應商資料。我們盡量保證 準確數據資料；  UL 黃卡含有 UL 驗證的易燃性和電氣特性 
物性說明

產品說明
The scraps generated during the processing of mulilayer polyolefins/ EVAL® structures are commonly recycled in a regrind layer for sheet and bottle applications. In some cases, some technical problems may happen such as die build-up, thermal instability （gels）, poor mechanical properties, poor welding or flow instability. Flow instability is occasionally observed in multilayer structures containing regrind, especially in cases where the ratio of regrind is high and/or the EVAL content in the regrind is high. The main cause of flow instability is the poor dispersion of the EVAL resin in the regrind layer due to the incompatibility between the various polymers. Improvement can be obtained by mechanically creating a better mixing during extrusion （regrind extruder, adapter size）. Also, Kuraray1 R&D has developed the GF-30 resin, an effective compatibilizer, which corrects this flow instability by finely dispersing the EVAL particles in the regrind mixture. GF-30 is also an effective thermal stabilizer designed to prevent regrind degradation. The GF-30 resin is a compatibilizer and a thermal stabilizer for polyolefin-EVAL mixtures. However, with any set of operating parameters, the information presented here can not be considered absolute. It does contain general operating procedures and recommendations which should provide some guiding lines for effective operation.
總體
材料狀態	已商用：當前有效
資料 1	Processing - Eval （English）Processing - Thermoforming （English）
供貨地區	北美洲
形式	顆粒料
加工方法	擠出

物理性能	額定值	單位制	測試方法
密度	0.960	g/cm3	ISO 1183
熔流率			ISO 1133
190°C/2.16 kg	1.3	g/10 min
210°C/2.16 kg	2.3	g/10 min

熱性能	額定值	單位制	測試方法
維卡軟化溫度	205	°F	ISO 306/A50
溶融溫度（DSC）	232	°F	ISO 3146

擠壓說明

The recommended design for metering screws: L/D Ratio: 24 to 30 Compression Ratio: 2.6 to 3.6 Zone Distribution: Feed: 8 to 10 DCompression: 8 to 10 DMetering: 8 to 10 DThe recommended design for barrier screws: L/D Ratio: 24 to 30 Compression Ratio: 2.5 to 3 Zone Distribution: Feed: 6 to 7.5 D （25% of screw length）Transition and Melting: 12 to 15 D （50% of screw length）Metering: 6 to 7.5 D （25% of screw length）

:何生 　
:86-　
傳真號碼:86-
地址:廣東 東莞市

EVOH，日本可樂麗，GF-30其它產品

EVOH，日本可樂麗，GF-30
EVOH，日本可樂麗，GF-20
EVOH，日本可樂麗， G176B
EVOH，日本可樂麗， G176A
EVOH，日本可樂麗，G156B
EVOH，日本可樂麗，G156A
EVOH，日本可樂麗，G156
EVOH，日本可樂麗，G110
EVOH，日本可樂麗，F(xiàn)P101B
EVOH，日本可樂麗，F(xiàn)P101A