恒隆塑膠原料有限公司位于東莞樟木頭鎮塑膠原料市場中心城C4棟58號,地理位置*,是專業生產、加工、銷售塑膠原料與改性工程塑料于一體的綜合性企業。經營產品有：POM塑膠原料,PET塑膠原料,PBT塑膠原料,PC+ABS塑膠原料……比如工程塑膠原料：POM、PBT、PET、PC/ABS、PA66、PC、PPO、PPE、PA6、PA46、PA9T、PA6T、PA12、PA11、ASA、AES、CA等。...
全氟烷氧基樹脂 PFA樹脂相對來說是比較新的可熔融加工的氟塑料。 PFA的熔點大約為580F，密度為2.13— 2.16g/cc（克/立方厘米）。PFA與 PTFE和FEP相似，但在302T以上時，機械性能略?xún)?yōu)于FEP，且可在高達500F下的溫度下使用，它的耐化學品性與PTEF相當。PFA的產品形式有用于模塑和擠塑的粒狀產品，用于旋轉模塑和涂料的粉狀產品；其半成品有膜、板、棒和管材。美國市場經銷的PFA樹脂有DUPOut公司的Teflon牌、Daikin公司的Neoflon牌、Ansimont公司的Hthen牌、HOechst Celanese公司的 Hostafl牌。PFA的用途與FEP類似。PFA（可溶性聚四氟乙烯〕耐熱、耐寒、化學穩定性、機械性、絕緣性、自潤滑性、耐折性、耐開裂性?xún)?yōu)異。公司開發有注塑、擠出，模壓料。2. 適用范圍:目前國內主要用于防腐防酸堿注塑件、高溫電線電纜、防酸堿內襯件，吹塑制品等。技術參數：比重（g/CM3）2.12-2.17
本公司 可以免費提供各種材料物性及各種材質認證 如：SGS UL MSDS ROHS MDS 等證明 ： 通過這些鏈接您能夠訪問供應商資料。我們盡量保證 準確數據資料； UL 黃卡含有 UL 驗證的易燃性和電氣特
| Hyflon® AD 40L | Solvay Specialty Polymers | Perfluoropolymer |
| Hyflon® AD 60 | Solvay Specialty Polymers | Perfluoropolymer |
| Hyflon® MFA 1041 | Solvay Specialty Polymers | Perfluoropolymer |
| Hyflon® MFA D5220X | Solvay Specialty Polymers | Perfluoropolymer |
| Hyflon® MFA F1520 | Solvay Specialty Polymers | Perfluoropolymer |
| Hyflon® MFA F1530 | Solvay Specialty Polymers | Perfluoropolymer |
| Hyflon® MFA F1540 | Solvay Specialty Polymers | Perfluoropolymer |
| Hyflon® MFA P6010 | Solvay Specialty Polymers | Perfluoropolymer |
| Hyflon® MFA XPH 5510_1N | Solvay Specialty Polymers | Perfluoropolymer |
物性說明
| 產品說明 |
Hyflon® MFA 1041 is a high extrusion speed resin specifically designed for insulation for plenum-rated LAN cables. MFA 1041 delivers superior electrical performance in addition to its excellent fire characteristics, physical properties, and processing. The unique chemical structure of MFA provides the superior properties necessary for the increasingly demanding ecommunications industry.
Cables manufactured with MFA 1041 have met the ecommunications Industry Association （TIA） Category 6 standard. The extremely low attenuation of MFA 1041 makes it a logical choice for the developing Augmented Category 6 standard. Cables made from MFA 1041 have met the fire performance requirements called out in NFPA 90a （"Standard for Air- Conditioning and Ventilating Systems"）.
Hyflon® MFA 1041 is not recommended for heavy wall applications where significant thermal stress crack resistance is required. |
| 總體 | |
| 材料狀態 | 已商用：當前有效 |
| 資料 1 | Technical Datasheet |
| 搜索 UL 黃卡 | Solvay Specialty PolymersHyflon® MFA |
| 供貨地區 | 北美洲非洲和中東南美洲歐洲亞太地區 |
| 性能特點 | 良好的電氣性能阻燃性能 |
| 用途 | 電線電纜應用管道通訊器材 |
| 機構評級 | NFPA Code 90a |
| RoHS 合規性 | RoHS 合規 |
| 形式 | 顆粒料 |
| 加工方法 | 擠壓層涂法 |
| 物理性能 | 額定值 | 單位制 | 測試方法 |
| 比重 | 2.13 到 2.18 | | ASTM D792 |
| 熔流率 （372°C/5.0 kg） | 22 到 28 | g/10 min | ASTM D1238 |
| 硬度 | 額定值 | 單位制 | 測試方法 |
| 硬度計硬度 （邵氏 D） | 55 到 60 | | ASTM D2240 |
| 機械性能 | 額定值 | 單位制 | 測試方法 |
| 拉伸模量 2 （73°F） | 72500 到 87000 | psi | ASTM D1708 |
| 抗張強度 （斷裂, 73°F） | > 2900 | psi | ASTM D1708 |
| 伸長率 （斷裂, 73°F） | > 280 | % | ASTM D1708 |
| Flex Life 3 | 6.0E+2 到 1.0E+3 | Cycles | ASTM D2176 |
| 沖擊性能 | 額定值 | 單位制 | 測試方法 |
| 簡支梁缺口沖擊強度 | 無斷裂 | | No Standard |
| 熱性能 | 額定值 | 單位制 | 測試方法 |
| 熔融溫度 | 536 到 554 | °F | ASTM D3307 |
| 線形膨脹系數 - 流動 | 0.000067 到 0.00011 | in/in/°F | ASTM D696 |
| 比熱 （73°F） | 0.215 到 0.263 | Btu/lb/°F | DSC |
| 導熱系數 （104°F） | 1.4 | Btu·in/hr/ft2/°F | ASTM C177 |
| 融合熱量 | 18.0 到 26.0 | J/g | DSC |
| 電氣性能 | 額定值 | 單位制 | 測試方法 |
| 表面電阻率 | > 1.0E+17 | ohm | ASTM D257 |
| 體積電阻率 | > 1.0E+17 | ohm·cm | ASTM D257 |
| 介電強度 4 | 890 到 1000 | V/mil | ASTM D149 |
| 介電常數 | | | ASTM D150 |
| 73°F, 1 MHz | 2.00 | | |
| 73°F, 850 MHz | 2.00 | | |
| 73°F, 2.10 GHz | 2.00 | | |
| 耗散因數 | | | ASTM D150 |
| 73°F, 1 MHz | 0.00020 | | |
| 73°F, 850 MHz | 0.00020 | | |
| 73°F, 2.10 GHz | 0.00090 | | |
| 可燃性 | 額定值 | 單位制 | 測試方法 |
| UL 阻燃等級 | V-0 | | UL 94 |
| 極限氧指數 | 95 | % | ASTM D2863 |
| 補充信息 | 額定值 | 單位制 | 測試方法 |
| Potential Heat | 970 | J/g | NFPA 259 |
COLOR MASTER BATCHES
We recommend that only Color Master Batches based in MFA 1041 be used. Master Batches based on other fluoropolymers can negatively influence the superior processing and electrical performance of MFA 1041. A list of suppliers can be obtained from your Solvay sales representative.
HEALTH SAFETY AND ENVIRONMENT
Hyflon MFA 1041 is a very inert polymer and it is not harmful if used and handled according to standard processing procedures. If handled inappropriay, it may release harmful toxic chemicals. Please refer to the Material Safety Data Sheets for more information on handling and safety. MFA 1041 is not produced using APFO and contains no APFO. MFA also complies with Directive 2002/95/EC （"Restrictions of hazardous substances in waste from electrical and electronic equipment" - RoHS）, Directive 2000/53/EC （"End of life of vehicles" - ELV） and Directive 76/769/EEC （"Restrictions on the marketing and use of certain dangerous substances and preparations"）, as subsequently amended.
PACKAGING AND STORAGE
Hyflon MFA 1041 resin is available in 25 kg （55 lbs） and 500 kg （1102 lbs） packaging. Though it has an indefinite shelf life, it is recommended to store it in a clean area, protected by direct sun light and possible contamination. |
| 擠出 | 額定值 | 單位制 | |
| 第1氣缸區溫度 | 482 到 554 | °F | |
| 第2氣缸區溫度 | 554 到 626 | °F | |
| 第3氣缸區溫度 | 644 到 680 | °F | |
| 第4氣缸區溫度 | 680 到 734 | °F | |
| 第5氣缸區溫度 | 707 到 743 | °F | |
| 法蘭溫度 | 734 到 752 | °F | |
| 連接器溫度 | 734 到 752 | °F | |
| 直角機頭溫度 | 734 到 770 | °F | |
| 熔體溫度 | 752 | °F | |
| 模具溫度 | 752 到 788 | °F | |
| Wire Preheat | 212 到 266 | °F | |
| 擠壓說明 |
WIRE AND CABLE PROCESSING GUIDELINES
As with other fluoropolymers, Hyflon MFA is corrosive in the melt. Therefore all parts coming into prolonged contact with the melt should be made with corrosion resistant materials such as Hasloy®, Inconel®, Monel® or Xaloy®. Chrome or nickel plating is not recommended since they are typically only sufficient for brief processing tests.
MFA 1041 is applied onto wire using tubing extrusion techniques similar to other thermoplastic materials. An overview of the temperature, tooling and equipment requirements are in the following tables.
MFA can be processed with many different screw designs. Single-flight screws are recommended while barrierflights should be avoided. A typical screw design consist of a long feed section, followed by a 2 to 6 flight transition and a 5 to 7 flight metering section. The addition of a Saxton mixing or other block mixing sections can improve the processing performance.
EQUIPMENT/TOOLING REQUIREMENTS
Line Speed: 1,500-2,500 ft/min （450-750 m/min）Draw Down Ratio: 80-120Draw balance: 0.98-1.05Extruder: L/D 24/1-30/1Screen pack: Breaker plate only is required |
:何生
:86-
傳真號碼:86-
地址:廣東 東莞市
特種料：PFA，美國蘇威，MFA 1041（產品說明）其它產品
特種料：PFA，美國蘇威，MFA 1041（產品說明）
特種料：PFA，美國蘇威，M640（產品說明）
特種料：PFA，美國3M，6515NZ （產品說明）
特種料：PFA，美國杜邦，TE-7043（ 產品說明）
特種料：PFA，美國杜邦，MP-501（ 產品說明）
特種料：PFA，美國杜邦，MP-310（ 產品說明）
特種料：PFA，美國杜邦，MP-102（ 產品說明）
特種料：PFA，美國杜邦，950HP（ 產品說明）
特種料：PFA，美國杜邦，940HP（ 產品說明）
特種料：PFA，美國杜邦，440HP（ 產品說明）
會員1.png)
QQ:2568841715
