| Product | Type | Description |
|---|
|
| NX-1440C | PA6 | - Medium viscosity, fast cycle molding resin.
- Crystallization initiators provide fast molding cycles through rapid melt set-up.
- Parts molded from NX1440 have better dimensional stability at moisture equilibrium than parts molded from conventional nylon.
- Suitable for such uses as clips and fasteners, bushings, small levers, gears, and window hardware.
- Optimum processing conditions should provide a melt temperature of 460 - 480°F at the nozzle.
|
| NYLENE 200 P | PA-6 | - Medium viscosity, general purpose nylon 6 molding resin which has been ground cryogenically to a very fine powder
- Excellent melt stability, grease resistance, and toughness
|
| NYLENE 201 | PA-6 | - Nucleated nylon 6 molding resin designed for faster molding cycle times and lower part shrinkage
|
| NYLENE 201L | PA-6 | - Lubricated, nucleated nylon 6 molding resin designed for faster molding cycle times and lower part shrinkage
|
| NYLENE 204 HS | PA-6 | - Heat stabilized version general purpose, fast cycling molding resin
- Crystallization initiators provide fast molding cycles through rapid melt set-up
- In addition to protection from heat degradation, parts molded from NYLENE 204 HS have better dimensional stability at moisture equilibrium than parts molded from conventional nylon
- Suitable for molding clip and fasteners, bushings, spacers, and other general purpose applications
|
| NYLENE 206 | PA-6 | - Medium viscosity, modified nylon 6 molding resin used extensively in injection molding applications and in applications requiring clear colors
|
| NYLENE 2401 HSSP BK | PA-6 | - High viscosity nylon copolymer with enhanced impact and high flexibility
- Optimized with good melt strength for high line speeds in thin wall sections
- Specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.
|
| NYLENE 2403 HSSP BK | PA-6 | - High viscosity nylon copolymer with enhanced impact and high flexibility
- Optimized with good melt strength for high line speeds in thin wall sections
- 2403 HSSP BK is one of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.
|
| NYLENE 2407 HSSP | PA-6 | - High viscosity nylon copolymer with high impact resistance and superior flexibility
- Optimized with good melt strength for high line speeds in thin wall sections, and is available in natural and black
- 2407 HSSP is one of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.
|
| NYLENE 2408 HSSP | PA-6 | - Modified nylon 6 with very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles
- Especially useful for convoluted tubing.
|
| NYLENE 2408 HSSP BK | PA-6 | - Modified nylon 6 with very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles
- Especially useful for convoluted tubing.
|
| NYLENE 2409 HSSP BK | PA-6 | - High viscosity nylon copolymer with enhanced impact and high flexibility
- Optimized with good melt strength for high line speeds in thin wall sections
- 2409 HSSP BK is one of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.
|
| NYLENE 2415 HSSP BK | PA-6 | - High viscosity nylon copolymer with high impact resistance and superior flexibility
- Optimized with good melt strength for high line speeds in thin wall sections
- 2415 HSSP BK is one of a family of grades specifically designed for the convoluted tubing used n the Automotive and Electrical industry, but can also be used for other extrusions and some molded parts.
|
| NYLENE 2433 HSSP BK | PA-6 | - Modified nylon 6 with very good physical properties and excellent extrusion characteristics.
|
| NYLENE 307 HS | PA-6 | - A low viscosity, heat stabilized nylon 6 molding resin.
|
| NYLENE 321 HS | PA-6 | - Impact modified, heat stabilized nylon 6 injection molding resin.
- Inherent heat and chemical resistance typical of nylon 6 resins, while having higher toughness for uses where some impact may occur during service
- Suitable for such applications as clips, fasteners, safety restraint components, and uses which require higher toughness and flexibility
|
| NYLENE 323 | PA 6 | - Flexurally modified nylon 6 molding resin with excellent impact resistance.
|
| NYLENE 323 HS | PA-6 | - Heat stabilized nylon 6 copolymer for both extrusion and injection molding
- Exhibits excellent flexibility and impact resistance in addition to the heat and chemical
|
