安博塑膠（香港）有限公司 是一家專業從事國外進口塑膠原材料銷售的貿易公司，公司成立于1999年，總部位于中國香港。銷售PP+GF，ABS V0 ABS+GF，TPE santoprene，PMMA透明等塑膠產品。自公司成立以來在競爭激烈的市場環境下，以創新、拼搏的精神不斷的發展、壯大。與國外各大塑膠原材料生產廠家建立了良好的合作關系，銷售業績在同行業中多年一直遙遙，在國內設有多個銷售分部，在...

PP  Tipco  Tipcolene ISRH MD TPE

我公司現貨銷售 Tipco Industries Tipcolene  pp全系列產品：

部分產品性能介紹如下：

Application	Features in Brief	Grade	More
Auto Interiors and Appliance Fascia	Environmentally friendly material, Easy Recyclability, 45-50% special wood filler, Excellent Extrudability	Tipwood/50/N/EX
Front & Rear Bumper	Elastomer modified, UV Stabilized Paintable Polypropylene Compound .	IBP/FH/NH/533
Bumper	Elastomer modified, UV Stabilized Paintable Polypropylene Compound .	Tipcolene/E/362S
Bumper	Elastomer modified, UV Stabilized Polypropylene Compound .	TPE/1000
Instrument Panel	Specially designed PP Compound with super high impact st., UV resistance and high HDT.	FPDG/M/55Y/IN
Dashboard	Mineral filled, Elastomer modified UV Stabilized, Scratch resistant PP Compound.	Tipcolene/HR/7224/HN
Upper Instrument Panel	Specially designed PP Compound with Super high stiffness, UV Stabilised.	ISL58/NH/264L
Lower Instrument Panel	Mineral filled, High impact UV Stabilised PP Compound.	ISRH/2NF/NH/264L
Instrument Panel	Mineral filled, Super High impact UV Stabilized PP Compound.	FPDZ/1000/6GL/IN
Instrument Panel	Mineral filled, Super High impact UV StabSilized PP Compound.	FPDC/TM/BK/IN
Front Grill	Chemically coupled Glass filled PP	RPG20/N/IN/CC
Helmet Box/Luggage Box	Specailly designed Glass filled PP Compound with superior properties （T.S, Izod Impact, HDT）.	SEB/200
	Mineral filled, High Impact Polypropylene compound.	FPT20/N/IN/PPC/SM
	Mineral filled, High Impact controlled rheology PP Compound.	FPT20/N/IN/PPC/SV
	10% Mineral filled PP Compound with high impact strength.	FPT10/N/IN/PPC/SRF
	30% Mineral filled PP Compound, controlled Rheology, High impact	FPT30/SPL/BK
Engine Parts	Mineral filled, High Heat resistant Polypropylene compound.	IBJH/SA/20/NH/11/L
Grip Assembly	Mineral filled PP Compound	FPC10/4BS/IN
Speedometer Box	40% Talc filled, high heat resistant PP compound	FPT40/TW/IN/PRL
Side grill/Air filter Assembly	30% Talc filled High Impact PP compound.	FPT30/BK/CP/IN
	10% Wallostonite filled PP Compound with high impact strength.	FPW10/N/IN/PPC/SRF
Trim Dash side R/L	Controlled Rheology, Super high Impact PP Compound	FPZ30/GR
Rotor fan blade	Glass filled PP compound in Metallic colour.	Tipcolene/Alfa
Grip Assembly	25% Filled PP Compound with Super high impact strength.	Tipcolene HR/7222/BX
Garnish Instrument Panel （R/L）	30% Talc filled, Super high impact UV Stabilized PP Compound.	FPZ/GLU
Lid Glove Box	10% Talc filled, High Impact PP Compound.	FPZ/CL
Case Glove box	Specially designed PP Compound with good stiffness and impact.	FPZ8/CU
Cover staring	5% Talc filled, high impact PP compound.	FPZ/C3
Bracket, Gr.Shift Bolt	20% Talc filled, High Impact strength PP compound.	FPZ8/GR
Box console lowers	Controlled Rheology, High heat resistant PP Compound.	FPZ8/Mod.BB/GR
Cover triming Belt	30% Talc filled PP Compound.	FPZ/TB/BK
Hood meter duster	30% Talc filled, Super high Impact strength PP Compound.	FPZ/HMC/BK
Cover triming Belt	5% Talc filled, Super high impact, controlled Rheology PP Compound.	FPZ/30/GR
	40% Talc filled PP Compound in Black colour.	FPT/40/BK/IN
	30% Talc filled, high impact strength PP Compound.	FPT30/PPC

 

PP塑料，化學名稱：聚丙烯 英文名稱:Polypropylene（簡稱PP）　　 比重:0.9-0.91克/立方厘米 成型收縮率:1.0-2.5% 成型溫度：160-220℃ 。 【成分結構】　　PP為結晶型高聚物，常用塑料中PPzui輕，密度僅為0.91g/cm3（比水小）。通用塑料中，PP的耐熱性，其熱變形溫度為80-100℃，能在沸水中煮。PP有良好的耐應力開裂性，有很高的彎曲疲勞壽命，俗稱“百折膠”。PP的綜合性能優于PE料。PP產品質輕、韌性好、耐化學性好。 PP的缺點：尺寸精度低、剛性不足、耐候性差、易產生“銅害”，它具有后收縮現象，脫模后，易老化、變脆、易變形。　　 日常生活中，常用的保鮮盒就是由PP材料制成。
【成型特性】　　
1.結晶料,吸濕性小,易發生融體破裂,*與熱金屬接觸易分解.　　
2.流動性好,但收縮范圍及收縮值大,易發生縮孔.凹痕,變形.　　
3.冷卻速度快,澆注系統及冷卻系統應緩慢散熱,并注意控制成型溫度.料溫低溫高壓時容易取向,模具溫度低于50度時,塑件不光滑,易產生熔接不良,流痕,90度以上易發生翹曲變形　　
4.塑料壁厚須均勻,避免缺膠,尖角,以防應力集中. 【工藝特點】 PP在熔融溫度下有較好的流動性，成型性能好，
PP在加工上有兩個特點：
其一：PP熔體的粘度隨剪切速度的提高而有明顯的下降（受溫度影響較小）；
其二：分子取向程度高而呈現較大的收縮率。　　 PP的加工溫度在200-300℃左右較好，它有良好的熱穩定性（分解溫度為310℃），但高溫下（270-300℃），長時間停留在炮筒中會有降解的可能。因PP的粘度隨著剪切速度的提高有明顯的降低，所以提高注射壓力和注射速度會提高其流動性，改善收縮變形和凹陷。模溫宜控制在30-50℃范圍內。PP熔體能穿越很窄的模具縫隙而出現披鋒。PP在熔化過程中，要吸收大量的熔解熱（比熱較大），產品出模后比較燙。PP料加工時不需干燥，PP的收縮率和結晶度比PE低。

 

本公司承諾:所銷售之塑膠原料均為進口原廠原包材料、均可提供原廠的物性表，UL MSDS SGS COC 咨詢！

安博塑膠（香港）有限公司
聯 系 人：陳　（）
：
：86-　
傳真號碼：86-
郵    箱：abplas abplas163.com
：1940006008
地址：中國廣東省東莞市樟木頭鎮塑膠市場3期A棟

:陳 　
:86-　
傳真號碼:86- :abplas
地址:中國廣東省東莞市樟木頭鎮塑膠市場3期A棟

MD TPE Tipcolene Tipco其它產品

MD TPE Tipcolene Tipco

PP NPP 25-2002 Network
PP NPP 25-2001 Network
PP NPP 25-1902 Network
PP NPP 25-1602 TF40 Network
PP NPP 25-1503 GF30 Network
PP NPP 25-1503 GF25 Network
PP NPP 25-1503 GF10 Network
PP NPP 25-1202TF20 Network