GF+SIGNET 3-5600 顯示表、處理控制器
5600批處理控制器
+GF+SIGNET 5600批處理控制器主要用于定量控制系統，實現更靈活輕松的監控方式。
技術數據
工作范圍：0.5-10KHz
顯示：模擬顯示；電子數字式顯示
數字：2×16背光式LCD數字顯示
供電電源：12-24直流或交流電源 50-60Hz 10W max
通用輸出：4-20mA
回路阻抗：350Ω max@12V；950Ω max@24V
精確度：±0.1%
可批處理型儀表
標準和論證
CE,UL,CUL
ISO9001：2000質量認證和14001：2004環境認證.
詳細英文資料介紹
5600 ProPoint® Batch Controller
The Signet 5600 Batch Controller provides control capability and process fine-tuning in a familiar package. The programming interface uses a four-button keypad and an intuitive procedure for adjusting a batching system to the best performance possible.
The standard ¼ DIN package houses an analogue display panel that features a batch status indicator with count-up or count-down dials. The backlit LCD displays flow rate and volume information and batch status, as well as calibration and setup instructions. The front of the unit is NEMA 4X/IP65 and is hard-coated, high-impact and UV resistant polycarbonate. The 5600 operates on 12 to 24 volts ±10%, regulated, either AC or DC. Connect any Signet flow sensor with a frequency output, then add connections to two relays for two-stage shutdown or overrun alarm functions, connect a remote start-stop switch and use the end-of-batch pulse to trigger the next step in the process.
Online Catalog
Fields of Application:
- Batch Processes
- Filter Backwash Initiation
- Chemical Addition
- Canning & Bottling
Advantages:
- Simple push-button operation
- Intuitive Software Design
- Easy Batch Volume Entry
- Auto-calibration
- Advanced Valve Control
- Dual Totalisers
- Tamper-proof Security Code
- Versatile low voltage power requirement
- 1/4 DIN, NEMA 4X/IP65 enclosure
- Hard-coated, High Impact & UV resistant polycarbonate front face
