China PPS hFR42 PPS描述：
China products have been specified in a wide range of injection molded applications such as automotive under-the-hood parts, power train components, pumps, fuel system components, surface mount electrical/electronics components, blower and pump parts, protective and non-stick coatings, surgical devices and power tools. Fortron PPS can be extruded or blow molded, may be used to produce films and composites, and is an excellent candidate for fuel cells and diesel fuel cars.
PPS
Standard injection moldable grades with glass fibers and/or mineral reinforcements are available, but many specialty grades are available for improved lubricity, low warpage, faster cycling and other areas of enhanced performance. Certain grades of PPS comply with ISO 10993 and USP Class VI, and Drug （DMF 14844） and Device （MAF-1097） Master Files have been created for them. These grades also meet European Directive 2002/72/EC for food contact applications and BfR （German Federal Institute for Risk Assessment , formerly BgVV, the German Federal Institute for Consumer Health Protection and Veterinary Medicine） standards.PPS is a high-temperature linear PPS that offers excellent dimensional stability, inherent flame resistance, and excellent chemical and solvent resistance. PPS is insoluble in all known solvents below 200°C （392° F）. It also shows tremendous stability in both typical and alternative automotive fuels.Aerospace Wing and Leading Edge Nose
Fiber-reinforced composites based on ’s high performance polyphenylene sulfide （PPS） make an important contribution to weight reduction of the Airbus A340 and A380. This helps lower fuel consumption and increase range and passenger capacity.PPS already had all the basic characteristics for use in aircraft construction – resistance to high temperatures and aggressive chemicals, hardness, impact strength, dimensional stability and inherent flame-retardancy. The trick was to create suitable structural elements embodying these attributes. This is done by extruding the PPS into film, combining it with chosen fibrous reinforcements and forming the final part under high pressure at 300°C （572°F）. Individual parts are then fabricated from the pressed composites and welded together in an autoclave to form the final component as one piece.
CD播放器
在各種固定的音響設備，CD / MD播放器，索尼使用移動磁鐵，而不是通常的輥。索尼的A-MAX系統（*的移動磁鐵2軸），是指這種類型的驅動器。在這個技術解決方案的選擇材料，日本專家一起在娛樂電子產品的選擇液晶聚合物（LCP）和聚苯硫醚（PPS）兩種材料。威達用于生產是沿著兩個軸移動底板。在此應用中，機械性能，適合在CD / MD播放機的特殊工作條件的要求，即高彈性模量和高沖擊強度。能夠滿足沒有任何問題的必然要求。鏡頭的持有人，另一方面，zui重要的標準是剛性好，重量輕耦合，以排除任何干擾的高頻率的共振。再次的Vectra LCP的是能夠滿足應用要求。索尼的CD托架插槽，選擇玻璃纖維增強聚苯硫醚。PPS的高剛性和強度的關鍵。產品圖片
東莞市龍輝祥塑膠原料公司是一家專業從事塑膠原料進口貿易公司。主營各國通用塑膠、工程塑膠、特種工程塑膠。公司以“誠信為本，創新求魂”的精神在客戶中樹立了良好的口碑。從進口到出口嚴格把關，可提供COA,SGS,UL黃卡!保證原廠原包!我是龍輝祥，期待你的來電!
電 話：
傳 真：
手 機：
：羅（業務）
:羅長龍
:
傳真號碼:
地址:中國廣東東莞市樟木頭鎮塑膠原料市場
銷售China PPS hFR42 PPS其它產品
銷售Zy ST7301 BK356
銷售Zy PLUS PLS93G35DH1 BK261
銷售Celstran PPS-SF6-01 AF3005 Natural PPS
銷售Zy FN727 NC010A
銷售Zy FN727 BK230A
銷售Zy FG7301 NC010
銷售Zy BM73G15THS BK317
銷售Zy 74G33W NC010
銷售Zy 74G33W BK196
