東莞龍輝祥塑膠原料公司自2002年6月成立以來,建立了完整的市場供應系統。以市場為導向，積極參與市場競爭，不斷完善規范化管理，使企業經營規模不斷發展壯大共同進步,共同發展，本公司*經營各國塑膠原料通用塑料：ABS、AS、GPPS、HIPS、PP、PE；食品級ABS、AS、PS、PP工程塑料：:COC鏡頭料，PMMA,POM,PC、PC/ABS、PA6/66、PA6、PBT、PET、ASA、PPO...

VAMPSON L 3035 PPS

 also offers unfilled, high viscosity PPS suitable for extrusion and compression molding to produce slabs, rods and other stock shapes commonly used for prototyping. linear PPS may be used with meltblown and spunbond technologies for melt spun nonwovens. Fiber and monofilament made from PPS can be found in woven or mesh conveyor belts, flame resistant clothing and filtration media. 

PPS航天用品 

索尼的CD托架插槽，選擇玻璃纖維增強聚苯硫醚?；诶w維增強復合材料泰科納高性能聚苯硫醚聚苯硫醚（PPS），作出了重要貢獻的空中客車A340和A380飛機的重量減少。這有助于降低油耗和增長幅度和客運能力。從泰科納easyflowing PPS的高剛性和強度的關鍵。在這個技術解決方案的選擇材料，日本專家一起在娛樂電子產品的選擇與寶理（公司在亞洲的子公司）從泰科納Vectra液晶聚合物（LCP）和聚苯硫醚（PPS）兩種材料。鏡頭的持有人，另一方面，zui重要的標準是剛性好，重量輕耦合，以排除任何干擾的高頻率的共振。再次的Vectra LCP的是能夠滿足應用要求。

 

基于聚苯硫醚復合材料現在被用于許多在飛機制造中的應用，包括機翼的鼻子，副翼和飛機龍骨梁。與鋁相比，使用的聚苯硫醚復合材料提高了設計的自由度，降低了20％至50％的重量和消除腐蝕的可能性。

 

PPS的各個部分，然后從按下的復合材料和制造，焊接在一塊形成的zui后一個組件一起反應釜。聚苯硫醚已經有飛機建設使用的所有基本特征 - 抗高溫和腐蝕性化學物質，硬度，沖擊強度，尺寸穩定性和固有的阻燃阻燃。訣竅是創造合適的結構元素，體現這些屬性。這是通過擠壓成片的聚苯硫醚，相結合，選擇纖維增援，形成高壓下的zui后一部分，在300℃（572℉）。

Domestic Water Supply Manifold 

The slip properties of a Hostaform C 9021 K ball in the valve mechanism ensure long-term smooth operation. The demands made on such components are considerable. For example, the casing must withstand a pressure of 12 bar for 50 years and have correspondingly high creep and fatigue strength.In collaboration with Hoechst Technical Polymers Division, UK, extensive FEM and mould flow studies produced a robust casing made from Hostaform C 2521.

 

Other mouldings in the tap are also made from polymers.The shut-off lever and the connector consist of glass-fibre-reinforced Hostaform GV 1/30 owing to its high strength and rigidity. Finally, the retention clamps, which are subjected to extremely high mechanical loads, are injection moulded from 1140L4 reinforced with 40% glass fibre.In domestic water taps from Atlantic Plastics, a number of materials ensure permanent smooth operation and freedom from leaks.

Fuel Cell End Plates 

A PEM fuel cell assembly contains a stack of about 200 series-connected cells. The stack is held together through bolting from the end plates to hold the bipolar plates in the stack together and compress the gaskets between them. Intervening insulating plates have bored manifold to feed hydrogen fuel, oxidizing air and cooling water to the stack, as well as to remove the water produced during cell operation. Even with automated machining, the two sets of plates can cost from $300 to $500. ’s development work suggests that integrated injection-molded plates combining end and insulating components may reduce plate cost to between $100 and $120 per stack while also reducing stack weight by at least 10 lb （4.95 kg）.

 

Injection-molded end plates made from ’s polyphenylene sulfide （PPS） can provide significant cost and weight savings in proton exchange membrane （PEM） fuel cells. Design changes integrating the end plate and the adjacent insulating plate may reduce cost and weight as much as 90% compared to current fuel cell prototypes employing metal.

產品圖片

東莞市龍輝祥塑膠原料公司是一家專業從事塑膠原料進口貿易公司。主營各國通用塑膠、工程塑膠、特種工程塑膠。公司以“誠信為本，創新求魂”的精神在客戶中樹立了良好的口碑。從進口到出口嚴格把關，可提供COA,SGS,UL黃卡!保證原廠原包!我是龍輝祥，期待你的來電!

 

電  話：

傳  真：

手  機：

：羅（業務）

 

 

:羅長龍　
:　
傳真號碼:
地址:中國廣東東莞市樟木頭鎮塑膠原料市場

銷售VAMPSON L 3035 PPS其它產品

銷售VAMPSON L 5031 PPS
銷售VAMPSON L 4051 PPS
銷售VAMPSON L 4019 PPS
銷售VAMPSON L 4010 PPS

銷售VAMPSON 5010 PPS
銷售VAMPSON 4010 PPS
銷售Bayblend PC/ABS 1473
銷售TRIBOCOMP PPS TS9 PPS
銷售拜耳APEC PC 9354