TEDUR L 9107-5 PPS
Fiber and monofilament made from PPS can be found in woven or mesh conveyor belts, flame resistant clothing and filtration media. also offers unfilled, high viscosity PPS suitable for extrusion and compression molding to produce slabs, rods and other stock shapes commonly used for prototyping. linear PPS may be used with meltblown and spunbond technologies for melt spun nonwovens.
Ferrule
The 8670A61 grade has outstanding flow properties, making it ideal for fine-structured design components such as plug connectors, known as ferrules.Other essential properties for this application are very low water absorption, low creep at high temperatures, good dimensional stability and even shrinkage in both flow and transverse directions.Vectra liquid crystal polymer is also used in fibre optics – particularly for connectors.has been working closely with systems and cable manufacturers to develop a number of special （PPS） grades tailored specifically to the requirements of fibre optic technology.
Ferrules can be injection moulded to incorporate holes to carry the 125 μm thick glass fibres to tolerances of 1-2 μm. These ferrules use Vectra grade A460, specially developed for such applications.The crucial factors here are Vectra’s good mechanical properties, even in thin wall sections, and the extreme precision with which ferrules can be made.
航天用品
基于聚苯硫醚復合材料現在被用于許多在飛機制造中的應用，包括機翼的鼻子，副翼和飛機龍骨梁。與鋁相比，使用的聚苯硫醚復合材料提高了設計的自由度，降低了20％至50％的重量和消除腐蝕的可能性?；诶w維增強復合材料泰科納高性能聚苯硫醚聚苯硫醚（PPS），作出了重要貢獻的空中客車A340和A380飛機的重量減少。這有助于降低油耗和增長幅度和客運能力。
聚苯硫醚已經有飛機建設使用的所有基本特征 - 抗高溫和腐蝕性化學物質，硬度，沖擊強度，尺寸穩定性和固有的阻燃阻燃。訣竅是創造合適的結構元素，體現這些屬性。這是通過擠壓成片的聚苯硫醚，相結合，選擇纖維增援，形成高壓下的zui后一部分，在300℃（572℉）。的各個部分，然后從按下的復合材料和制造，焊接在一塊形成的zui后一個組件一起反應釜。
Fuel Cell End Plates
Design changes integrating the end plate and the adjacent insulating plate may reduce cost and weight as much as 90% compared to current fuel cell prototypes employing metal.Injection-molded end plates made from ’s polyphenylene sulfide （PPS） can provide significant cost and weight savings in proton exchange membrane （PEM） fuel cells.
產品圖片
東莞市龍輝祥塑膠原料公司是一家專業從事塑膠原料進口貿易公司。主營各國通用塑膠、工程塑膠、特種工程塑膠。公司以“誠信為本，創新求魂”的精神在客戶中樹立了良好的口碑。從進口到出口嚴格把關，可提供COA,SGS,UL黃卡!保證原廠原包!我是龍輝祥，期待你的來電!
電 話：
傳 真：
手 機：
：羅（業務）
:羅長龍
:
傳真號碼:
地址:中國廣東東莞市樟木頭鎮塑膠原料市場
銷售TEDUR L 9107-5 PPS其它產品
銷售 PC ML7691 Lexan
銷售 PC ML7652 Lexan
銷售TEDUR L 9107-1 PPS
銷售TEDUR L 9105-1 PPS
銷售 PC ML6451 Lexan
銷售TEDUR B9217-1 PPS
銷售 PC ML7690 Lexan
銷售 PC ML7687 Lexan
銷售 PC ML7686E Lexan
