銷售美國Ticona VECTRAZ A130 LCP材料介紹:
The Standard for the Industry. Excellent balance of properties, including easy flow, easy processing, thermal stability, chemical resistance, mechanical and electrical properties. Suitable for vapor phase surface mount electrical and electronic devices.VECTRA should in principle be predried. Because of the necessary low maximum residual moisture content the use of dry air dryers is recommended. The dew point should be =< - 40° C. The time between drying and processing should be as short as possible.
For subsequent storage of the material in the dryer until processed the temperature does not need to be lowered for grades A, B, C, D and V （<= 24 h）.
美國Ticona LCP材料簡介：
ZENITE LCP liquid crystal polymerresins are easily melt processible
and have a number of highly desirable properties that make them
especially suitable for precision electrical and electronic parts in
lighting, ecommunications, aerospace, automotive, fibre optics
and other advanced uses. Typical applications include connectors,
bobbins, relays, motor components, sockets, imaging and sensor
devices, ignition systems, etc.
The ZENITE LCP family featuresexcellent dimensional stability and
creep resistance, especially at very high temperatures. When in a
molten state its molecules tend to align with the flow, providing
even greater strength in the flow direction; this also contributes
to its superior wide-temperature range.
The physical advantage of low thermal expansion and low mould
shrinkage-properties is further enhanced in thin-wall sections due
to even more pronounced molecular alignment. In addition these
resins are highly resistant to many chemicals, including concentrated
acids, bases and hydrocarbons. They also display outstanding
fatigue resistance and high dielectric strength performance
over a very widetemperature range.
美國Ticona LCP材料簡介：
1. Because of its toughness and mechanical strength over a broadtemperature range, ZENITE 6130 liquid crystalpolymers as found in compact coil forms, offer United Technical Products
Inc. board assembly advantages and result in excellent pin retention.Itssuitability for precision moulding in thin sections allows board space savingat equal winding space. The material is UL94 V0 recognized.
2. Injection moulded microminiature surface-mount Conan™ connectors,used inportable phones and computers,are a classic case for ZENITE. High thermal stability, precisionsurfaces and strength in thin walls are crucial factors in the field ofmicro-electronics.
3. The qualities of ZENITE permit these bobbin assemblies to obtain increased windingspace, excellent pin positioning and to withstand SMT soldering processes.
4. In the miniature world of Litfuse Inc., ZENITE LCP is welcomed for use in holders for ceramic fuses and for theencapsulation of glass fuses. It allows assembly by infrared and other solderingprocesses. The strength of the material is put to the test every time a fusehas to be replaced; a test successfully passed with ZENITE.
5. ZENITE can also be perfectlyand easily metallised. For this reason, this lamp socket, made by VLM, ismoulded in ZENITE, with a very hightemperature resistance as a result. Extra high thermal resistance LCP replaces other high temperature polymers, whichsometimes melt under these extreme conditions.
6. The market trend is to design smaller antifog lamps with more powerful bulbs,hence the temperature reached inside the housing has dramatically increased. ZENITE 6330 BK was selected for its excellent heat resistance,no out-gassing, and goodsurface appearance.
鄭重承諾！我公司是專業原料供應商，原料均國外進口，原廠包裝，有專業人士質量檢測，原料均可提供一系列報告證明等。
因為專注，所以專業，*服務，互利共贏。是我公司一貫的經營宗指！
東莞市龍輝祥塑膠原料公司
：
：@139.com
：羅
:羅長龍
:
傳真號碼:
地址:中國廣東東莞市樟木頭鎮塑膠原料市場
銷售LCP A130其它產品
銷售LCP A150
銷售LNP Stat-Kon OCL13 PPS
銷售LCP A115
銷售LCP ZE55801
銷售LCP ZE55205
銷售LCP ZE55201
銷售LCP ZE16401
銷售LNP Lubricomp OX95338 PPS
銷售LCP 7755
