XG-D-40全自動后送料數控機床 設備性能Equipment performance:
1.優質鑄鐵牢固一體化設計，抗震性強，提高整機剛性和定位精度。
2.送料機設計，采用伺服電機送料穩定性好，振動小，噪音小。
3.送料直徑，10- -40mm
4.送料長度，50-1500MM
1. High-quality cast iron has a solid integrated design, strong shockresistance, and improves the rigidity and positioning accuracy of thewhole machine.
2. The design of the feeder is first- class, and the servo motor is used forfeeding with good stability, low vibration and low noise.
3. Feeding diameter, 10- 40mm
4. Feeding length, 50-1500MM
設備參數：
| 主要參數 | The main parameters | 單位Unit | XG-D-40 |
| 主軸單元通孔 | Spindle unit through hole | mm | φ48 |
| 最大通棒料直徑 | Maximum diameter of pass bar | mm | φ40 |
| 床身上最大回轉直徑 | Maximum turning diameter of bed | mm | 420 |
| 床身結構 | Bed structure | 斜床身38° | |
| 電主軸最高轉速 | Motor spindle speed | r/min | 4500 |
| X軸有效行程 | X Axis effective stroke | mm | 700 |
| Z軸有效行程 | Z Axis effective stroke | mm | 450 |
| X/Z軸絲桿 | X/Z Axis screw | mm | 3208/3210 |
| X/Z軸滾柱線性導軌 | X/Z axis roller linear guide | mm | 30 |
| X/Z軸快移設定速度 | X/Z Axis rapid traverse setting speed | m/min | 18 |
| X/Z軸重復定位精度 | X/Z Axis repeat positioning accuracy | mm | 0.005 |
| X/Z軸絕對定位精度 | X/Z Axis absolute positioning accuracy | mm | 0.005 |
| 主軸分度重復定位精度 | Spindle index repeat positioning accuracy | ≤20角秒，即0.006° | |
| 主軸分度絕對定位精度 | Absolute positioning accuracy of spindle indexing | 70角秒，即0.02° | |
| 主軸(C軸)電機(選配) | Spindle (C axis) motor (optiona) | KW | 3.7 |
| X/Z軸伺服電機(選配) | X/Z Axis servo motor (optional) | N/m | 6N.m/10N.m |
| 整機重量(鑄鐵或鋼板機座) | Whole machine weight (cast iron or steel plate base) | KG | 1800 |
| 長X寬X高 | L X W X H | mm | 1950X1260X1700 |
