型號 | model | unit | 中國臺灣百塑(歐米尼) | ||||
射出系統 | injection unit | 螺桿直徑 | screw diameter | mm | 34 | ||
射出壓力 | maximum injection pressure | kg/cm2 | 169 | ||||
理論射出容量 | theoretical shot volume | cm3 | 150 | ||||
射出量 | maximum shot weight | g/oz | 149 | ||||
射出率 | injection rate | cm3/sec | 120 | ||||
螺桿行程 | screw stroke | mm | 150 | ||||
螺桿轉速 | screw rotation speed | rpm | 10--300 | ||||
鎖模系統 | clamping unit | 鎖模力 | clamping force | tons | 120 | ||
開模力 | opening force | tons | 0-----140 | ||||
模板尺寸 | platen size | mm | 750*850 | ||||
模柱間距 | distance between tie bars | mm | 450*550 | ||||
小模厚 | minimum mold thickness | mm | 200 | ||||
開模行程 | opening stroke | mm | 250 | ||||
大開模距離 | open daylight | mm | 450 | ||||
頂出力量 | ejector force | tons | 27*45 | ||||
頂出行程 | ejector stroke | mm | 100 | ||||
滑模系統 | slide unit | 圓盤直徑 | rotary table diameter | mm | |||
滑模行程 | sliding table stroke | mm | |||||
圓盤站數 | rotary station | -- | |||||
大模具重量 | max.mold weight | kg | |||||
定位精度 | station clearance | mm | |||||
油壓電力系統 | hydrulic power | 大液壓壓力 | max.hydrylic pressure | kg/cm2 | 140 | ||
泵浦吐出量 | pump output | L/min | 71 | ||||
作動油量 | oil reservoil capacity | l | |||||
冷卻水用量 | cooling water consumption | L/hr | |||||
馬達電力 | motor power | kw | 22 | ||||
電熱容量 | barrel heating power | kw | |||||
總用電量 | total wattage | kw | 27.5 | ||||
其它 | others | 機器重量 | machine weight | tons | 4 | ||
機器外形尺寸 | machine dimensions(L*W*H) | m | 3.16*1.73*1.6 | ||||
付船重量 | shipping weight | tons | |||||
付船尺碼 | shipping measurement(L*W*H) | m | |||||
