XGH電子式環剛度試驗機 管道環剛度檢測設備 管道環剛度試驗機
一 產品介紹
環剛度試驗機廣泛應用于具有環形橫截面的熱塑性塑料管材和玻璃鋼管環剛度的測定,滿足PE雙臂波紋管、纏繞管和各種管材標準的要求，是各科研院所、質量檢測部門及管材生產廠家理想的檢測儀器
二 特點
1 可以完成管材環剛度、環柔度、扁平、焊縫拉伸等試驗。
2 按鍵調速、試驗力位移數字顯示，具有峰值保持、破壞自動停機、過流、過載自動保護功能
3 配備內徑變形裝置，可以精確測量光壁管和波紋管內徑的變形
三 符合標準
GB/T 9647-2003熱塑性塑料管材環剛度的測定
GB/T 18477-2001埋地排水用硬聚氯乙烯雙壁波紋管材
GB/T 16800-1997排水用芯層發泡硬聚氯乙烯管材
GB/T1947 埋地用聚乙烯結構壁管道系統
GB/T 165-2002 高密度聚乙烯纏繞壁結構管材
GB/T 838-1998 玻璃纖維纏繞增強熱固性樹脂夾砂壓力管
GB/T16491、GB/T5836等標準的規定
ISO 9697、ISO 9969、ASTM標準 D 2412
四 主要技術參數：
1 zui大負荷：10kN 20kN 30kN 50kN
2 測量精度；±1%。
3 速度范圍；1mm/min-200mm/min，
4 速度精度; ±2%。
5 位移測量精度 ；±1%
6 位移分辨率 ；0.1mm。
7 有效壓縮空間 ；0--1000mm 0--1500mm 0--2000mm。
8 有效跨距：800mm.
XGW微機控制環剛度試驗機 管道環剛度檢測設備 管道環剛度試驗機
一產品介紹：
XGW系列微機控制環剛度試驗機采用機械加荷、電子測量、數字連續調速，應用微型單片機進行實時控制。廣泛應用于具有環形橫截面的熱塑性塑料管材和玻璃鋼管環剛度的測定,滿足PE雙臂波紋管、纏繞管和各種管材標準的要求。該機對試驗力、位移、速度同時進行數字顯示，并有試驗力峰值保持功能。適用于塑料管材環柔、環剛度、扁平、焊縫拉伸、管材蠕變比率等試驗。并具備電子*試驗機的所有功能，可以作拉伸、壓縮、彎曲等試驗。是工礦企業、科研院所、大專院校、商檢仲裁、技術監督等部門的理想檢測設備。
二 特點：
1、 閉環控制：采用松下電機和伺服系統，高性能的調速系統使試驗速度實現閉環、自動控制；
2、軟件系統：采用WindowsXP中文平臺下的人機對話操作，操作簡單，數據準確；開放式軟件，可以根據客戶的個性化要求，出具不同的實驗報告和參數。
3、 實驗數據和曲線可以存儲、分析、打印和調閱：通過計算機，自動求取zui大試驗力、斷裂強度、屈服強度、抗拉強度、彎曲撓度、彈性模量、伸長率等參數，并對試驗結果自動存儲；
4、可繪制多種實驗曲線：力－伸長、應力－時間、力－時間、伸長－時間等各種曲線，并具備曲線局部放大、分析和多個試樣曲線可用不同顏色迭加、對比等功能。
5、 安全保護功能齊全：具備試樣拉斷、過載、過流、撞車試驗機自動停機等多種保護功能：
6、配內徑測量系統，可以精確測量光壁管和波紋管內徑的變形量
7 采用PC機和單片機系統兩種控制方式，既可由單片機系統單獨操控，亦可與PC機連接使用，實現強大數據處理，分析，曲線跟蹤，數據庫管理等功能
8 自動返回零點，試驗結束自動停車并返回，提高實驗效率，（可自主設定）
9 自動清零：主控計算機接到試驗開始指令，測量系統便自動清零。
10 自動換檔：根據負荷大小自動切換到適當量程。以確保測量數據精確度。
三 符合標準
GB/T 9647-2003熱塑性塑料管材環剛度的測定
GB/T 18477-2001埋地排水用硬聚氯乙烯雙壁波紋管材
GB/T 16800-1997排水用芯層發泡硬聚氯乙烯管材
GB/T1947 埋地用聚乙烯結構壁管道系統
GB/T 165-2002 高密度聚乙烯纏繞壁結構管材
GB/T 838-1998 玻璃纖維纏繞增強熱固性樹脂夾砂壓力管
GB/T16491、GB/T5836等標準的規定
ISO 9697、ISO 9969、ASTM標準 D 2412
四、主要技術參數：
1 zui大負荷；10kN 20kN 30kN 50kN 100KN
2 有效壓縮空間：0--1000mm 0--1500mm 0--2000mm 0--3000mm。
3負荷測量精度等級；1級
4力值顯示分辨率：0.1N
5變形顯示分辨率：0.02mm
6 位移顯示分辨率：0.001mm
7 速度范圍：0.1～500mm/min
8 內徑測量系統測量范圍：10mm--2000mm
9 電源：交流220V±10% 50Hz 1.5kW
10外形尺寸：1400×800×2800mm（長X寬X高）
11整機重量：480Kg
XGH ring stiffness testing machine pipe ring stiffness testing machine
A product duction
Ring stiffness testing machine is widely applied in a circular cross section of the determination of thermoplastic pipe and glass steel ring stiffness, meet arms bellows, winding pipe and all kinds of PE pipe standard requirements, is the scientific research institutes, quality inspection departments and tubing manufacturers the ideal testing instrument
Two characteristics
1. The ring stiffness, ring flexibility, flat and weld tensile test can be completed.
The number of key speed adjustment and test force displacement shows that it has the peak maintenance, the failure of automatic stop, overflow and overload automatic protection function
Equipped with inner diameter deformation device, it can accuray measure the deformation of the inner diameter of the tube and bellows
Three standard
GB/T 9647-2003 determination of the ring stiffness of thermoplastic tubing
GB/T 18477-2001 buried drainage with hard polyvinyl chloride double wall corrugated pipe
GB/T 16800-1997 drainage core layer foamed hard polyvinyl chloride tubing
GB/T1947 embedded polyethylene wall pipe system
GB/T 165-2002 high density polyethylene winding wall structure pipe
GB/T 838-1998 fiberglass winding enhanced thermosetting resin sand pressure tube
GB/T16491, GB/T5836 standard
ISO 9697, ISO 9969, ASTM 標準D 2412
4 main technical parameters:
1 maximum load: 10kN 20kN 30kN 50kN
2. Measurement accuracy;
Plus or minus 1%.
3 speed range;
1 mm/min - 200 mm/min,
4 speed accuracy;
Plus or minus 2%.
5. Accuracy of displacement measurement;
Plus or minus 1%
6 displacemen resolution;
0.1 mm.
7. Effective compression space;
0 0 0-1000 mm - 1000 mm - 2000 mm.
Effective span: 800mm.
XGW microcomputer ring stiffness testing machine pipe ring stiffness testing machine
Product :
XGW series microcomputerl ring stiffness tester adopts mechanical loading, electronic measurement and digital continuous speed , and the microchip s used for real-time
It is widely used in the determination of the ring stiffness of thermoplastic tubing and glass tube with circular cross section, which meets the requirements of PE arms bellows, winding pipe and various pipe material standards.
The test force, displacement and speed of the machine are displayed simultaneously, and the test force peak retention function.
It is applicable to the test of plastic pipe ring, ring stiffness, flat, weld tensile and tube creep ratio.
It has all the functions of electronic universal testing machine, such as stretching, compression and bending.
It is an ideal testing equipment for industrial and mining enterprises, scientific research institutes, colleges and universities, commodity inspection and arbitration, technical supervision and other departments.
Two features:
1. Closed loop adopt the panasonic motor and servo system, the high performance speed regulating system enables the test speed to be closed and automatic
2. Software system: using the man-machine dialogue operation of Windows xp Chinese platform, the operation is simple and the data is accurate;
Open software can provide different experimental reports and parameters according to customer's personalized requirements.
3, the experimental data and curves can be stored, analyzed, print, and read: through computer, automatically calculate the maximum test force, tensile strength, yield strength, tensile strength, bending deflection, parameters such as elastic modulus, elongation, and the test results automatically stored;
4, a variety of experimental curve can be drawn: force - elongation, elongation, stress and time, force - time - time and curve and curve local amplification, analysis and multiple sample curve superposition can use different color, and other functions.
5. The safety protection function is complete: it is equipped with various protective functions such as sample pull, overload, overcurrent, automatic shutdown of crash test machine, etc. :
6. The inner diameter measurement system can accuray measure the deformation of the inner diameter of the tube and bellows
7 by using PC and single chip microcomputer system two kinds of mode, as well as system by single-chip microcomputer alone, can also be connected to the PC using, realize the powerful data processing, analysis, curve tracking, database management, and other functions
8 automatic return zero, test end automatic stop and return, improve experimental efficiency, (self-setting)
Automatic clear zero: the main computer receives the test to start the instruction, the measurement system automatically zero.
Automatic shift: automatically switch to the appropriate range according to the load size.
To ensure the accuracy of measurement data.
Three standard
GB/T 9647-2003 determination of the ring stiffness of thermoplastic tubing
GB/T 18477-2001 buried drainage with hard polyvinyl chloride double wall corrugated pipe
GB/T 16800-1997 drainage core layer foamed hard polyvinyl chloride tubing
GB/T1947 embedded polyethylene wall pipe system
GB/T 165-2002 high density polyethylene winding wall structure pipe
GB/T 838-1998 fiberglass winding enhanced thermosetting resin sand pressure tube
GB/T16491, GB/T5836 standard
ISO 9697, ISO 9969, ASTM標準 D 2412
Iv. Main technical parameters:
1 maximum load;
10kN 20kN 30kN 50kN 100KN
2. Effective compression space: 0--1000mm 0--1500mm 0--2000mm 0-- 3000mm.
3. Level of load measurement accuracy;
Level 1
4 force value display resolution: 0.1N
5. Deformation display resolution: 0.02mm
6 displacement display resolution: 0.001mm
7 speed range: 0.1 ~ 500mm/min
Measuring range of internal diameter measurement system: 10mm--2000mm
9 power supply: ac 220V plus or minus 10% 50Hz 1.5kw
10 dimensions: 1400 X 800 * 2800mm (long X width X height)
Total weight: 480Kg
